- How does the calculator decide my body shape?
- It uses the FFIT rules, which compare your three measurements in inches (centimeters are divided by 2.54 first). Roughly: if your bust and hips are within about an inch of each other and your waist is at least 9 inches smaller than your bust, you're an hourglass. If your hips are 3.6 to 10 inches bigger than your bust and your waist is at least 9 inches smaller than your hips, you're a bottom hourglass. Flip that and you're a top hourglass. Hips bigger than bust but a waist that isn't dramatically smaller is a triangle; bust bigger than hips with a similar waist is an inverted triangle. Anything that matches none of those is a rectangle, which is why the tool always gives you an answer.
- Where does the seven-shape system come from?
- From a 2004 study at North Carolina State University by Simmons, Istook and Devarajan, usually shortened to FFIT (Female Figure Identification Technique). They scanned thousands of bodies and looked for clusters that actually predicted how garments fit, rather than picking fruit names that sounded intuitive. That's the important caveat: FFIT is a garment-fit taxonomy. It was built to help patternmakers and shoppers, not to say anything about your health. A body-fat percentage or a BMI is a different question with a different tool.
- Why does the tool ask for a high hip measurement?
- Because it's the only thing that separates a spoon from a bottom hourglass. Both have hips wider than the bust and a clearly defined waist. The difference is a shelf: on a spoon, the high hip (about 7 inches below the waist, over the hip bone) measures at least 1.193 times the waist. Two people with identical bust, waist and hip numbers can be different shapes, and the high hip is what tells them apart. It's optional because most people don't have that number handy — leave it blank and the tool simply returns bottom hourglass instead.
- What's the waist-to-hip ratio, and why is it shown?
- It's your waist divided by your hips. A 27 inch waist and 40 inch hips gives 0.68. It's a single number that travels well: it doesn't change when you switch units, it's the number most size charts and most research use, and it's easier to compare over time than three separate measurements. It isn't the same thing as your shape — two people can share a ratio and land on different shapes because the bust is in the shape rules and not in the ratio.
- My measurements changed a little and the shape flipped. Is that normal?
- Yes, and it's worth knowing about. The rules use hard thresholds — 1 inch, 3.6 inches, 9 inches — so a body sitting right on a line moves between two shapes with a small change in how you hold the tape. If your numbers are near a boundary, treat the shape as a hint rather than a verdict. Measure twice, keep the tape level, and look at the three gaps shown under the result: they tell you how close to the line you actually are.
- Should I measure over clothes?
- Measure over bare skin or thin underwear. A sweater can add two inches to a bust measurement, which is enough to move you a whole shape. Keep the tape level all the way around, including across your back, and snug but not tight — you should be able to slip a finger under it at the waist. Standing in front of a mirror helps you catch a tape that's ridden up at the back.
- Does this work for men?
- Not well. FFIT was built and validated on female measurements, and running men's numbers through it returns rectangle almost every time, because the bust-to-waist and hip-to-waist gaps that drive the rules are usually smaller. The menswear taxonomy uses different names (trapezoid, triangle, oval) and different thresholds. That's a separate tool, not a toggle on this one — putting both behind one set of inputs would just give half the people a confidently wrong answer.
- What do I actually do with the answer?
- Use it as a shortcut when you're reading fit advice. Most style guides and most garment reviews assume you already know whether you're a pear or a rectangle, and they're useless until you do. Knowing your shape also explains why a whole category of clothing never works on you: if your hips are 6 inches wider than your bust, a dress cut from a straight block will fit one half of you at a time. Bring the copied line — shape plus all three measurements — when you're comparing size charts online.
- Why does the tool say my high hip should be smaller than my hips?
- Because the high hip sits above the widest point, so a number bigger than your hips almost always means the tape slipped down to the fullest part, or the two numbers got swapped between fields. Re-measure the high hip about 7 inches below your waist, over the hip bone, and re-measure the hips at the widest point with your feet together. If they genuinely come out the same, that's fine — equal is accepted.
- Does any of this get sent anywhere?
- No. The calculation runs in your browser, in JavaScript, on the page you're already looking at. Typing fires no network request, nothing is written to the URL, and there's no account, no email field and no saved history. Close the tab and the numbers are gone.