- What is the standard coffee-to-water ratio?
- The Specialty Coffee Association's gold-cup standard is 1:18 — one gram of coffee to 18 grams of water — though most third-wave cafes pull pour overs slightly stronger at 1:15 to 1:16. The number written 1:16 means "for every gram of coffee, use 16 grams of water." Water density is taken as 1 g/ml, so 1 gram of water is also 1 millilitre. Other brew methods use different ratios: French press 1:15, AeroPress 1:14, cold brew concentrate 1:8, espresso 1:2. The calculator presets reflect these conventions.
- Why does the ratio matter so much?
- Extraction. Coffee compounds dissolve into water at different rates — acids and bright fruit notes come out first, then sugars and caramel, then bitter compounds. Get the ratio wrong and you either under-extract (sour, thin, watery) or over-extract (bitter, harsh, chalky). The 1:16-1:18 sweet spot for pour-over isn't arbitrary; it's the window where the right amount of soluble material ends up in the cup for typical brew times and grind sizes. Change the ratio, and you need to compensate with grind size or brew time to hit the same flavor.
- How accurate does the measurement need to be?
- Within about 1 gram for coffee and 5 grams for water is the practical accuracy threshold for a noticeable taste difference. A 0.1g pocket scale (Hario, Acaia, Felicita, or any $20 kitchen scale) is the right tool. Volume scoops, tablespoons, and "a heaping spoonful" introduce 20-30% errors easily — different roast levels have different densities, and grind size changes the packing factor. The single biggest upgrade most home brewers can make is weighing everything in grams.
- Are coffee grams and water grams the same as water ml?
- For water, yes — 1 ml of water weighs almost exactly 1 gram at room temperature (the density of water is 0.997 g/ml at 25°C, close enough that every coffee reference rounds it to 1). So 500 ml of water = 500 g, and a 1:16 ratio with 30 g of coffee needs 480 g (= 480 ml) of water. Coffee grams are obviously not equivalent to coffee ml — coffee beans have wildly variable density depending on roast and grind. Always weigh coffee; volume is unreliable.
- What ratio should I use for espresso?
- Modern espresso ranges from 1:1 (ristretto, ~18g in, 18g out) to 1:3 (lungo, ~18g in, 54g out), with 1:2 (normale, ~18g in, 36g out) being the default. The calculator defaults to 1:2 — it's what almost every cafe pulls unless asked otherwise. Note that espresso yield is measured by weight of liquid in the cup, not by volume — the crema makes volume measurements unreliable. A 36-gram pull from an 18g dose is the canonical normale shot, typically extracted in 25-30 seconds at 9 bars of pressure.
- Why is cold brew 1:8 instead of 1:16 like pour over?
- Because 1:8 is the concentrate ratio. Cold brew at 1:8 is brewed strong and then diluted 1:1 with water, milk, or ice melt at serving time — so the cup you actually drink is roughly 1:16, the same as pour over. Brewing at full strength (1:16 directly) for 12-24 hours over-extracts and tastes flat; the concentrate-then-dilute approach gives more flavor with less of the bitter tail. If you prefer ready-to-drink cold brew with no dilution, try 1:12 or 1:14 at full immersion and skip the dilution step.
- How do I make a stronger or weaker cup?
- Drop the ratio (more coffee per gram of water) for stronger; raise it for weaker. From the default 1:16 pour over: 1:14 is noticeably stronger, 1:18 is noticeably weaker, 1:20 is the upper limit before it tastes thin. But ratio isn't the only knob — finer grind extracts more, longer brew time extracts more, hotter water extracts more. If a brew tastes weak at 1:16, finer grind first; if it tastes sour, that's under-extraction and you need finer grind, not less water. Adjust one variable at a time.
- What if I'm brewing a different method — moka pot, siphon, percolator?
- Moka pot is roughly 1:7 to 1:10 (it's mid-strength between espresso and drip, brewed under low pressure). Siphon (vacuum pot) sits at 1:15, similar to pour-over. Percolator runs 1:18-1:20 because the brewing cycle re-extracts continuously. Turkish coffee is closer to 1:10 because it's served unfiltered. The calculator covers the five most common methods; for anything else, enter the ratio manually using the override field.
- Why use 1:16 instead of 2 tablespoons per 6 oz cup?
- Because 2 tablespoons of coffee weighs anywhere from 9 grams (light, airy roast, coarse grind) to 14 grams (dark, dense roast, fine grind) — and 6 oz of water is 177 ml. So "2 Tbsp per 6 oz cup" is some ratio between 1:12 and 1:20 depending on the day. The volumetric instruction printed on coffee maker carafes has never produced a consistent cup; weighing in grams does. Switch once, never go back.