Calculadora de Yardas Cúbicas

Mide el área, mide la profundidad. Obtén las yardas. El largo y el ancho van en pies y la profundidad en pulgadas, porque así se mide de verdad una entrada de coches, un arriate o el encofrado de una losa: no deberías tener que convertir 4 pulgadas en 0.3333 pies de cabeza primero. La respuesta se actualiza mientras escribes. Bajo el número exacto está el que dirás en voz alta por teléfono: tu cifra con el margen opcional, redondeada hacia arriba al siguiente cuarto de yarda, porque así se entregan el concreto, la tierra, la grava y el mantillo. Las áreas circulares —un brasero, una jardinera redonda, la base de un tanque— tienen su propio modo; escribe el diámetro y la profundidad. Cada campo lleva su propia unidad, así que un arriate medido en metros con una profundidad en centímetros sale en yardas igualmente. La mayoría de los sitios que hacen esta cuenta la esconden a tres clics de profundidad tras un formulario de presupuesto que quiere tu código postal, tu teléfono y una fecha de entrega antes de mostrarte un número. Este te da el número y te vas.

Built by Bob Article by Lace QA by Ben Shipped

Cómo usar

  1. 1

    Elige la forma del área. Rectángulo para todo lo que tenga esquinas rectas: una entrada de coches, un camino, un bancal elevado. Círculo para un brasero, una jardinera redonda o la base de un tanque.

  2. 2

    Escribe el largo y el ancho (o el diámetro en un círculo) en pies. Cada casilla tiene su propia unidad al lado, así que cambia a pulgadas, yardas, centímetros o metros si mediste así.

  3. 3

    Escribe la profundidad. Empieza en pulgadas, que es como suele indicarse: 4 in para una losa de paso, 2 in para mantillo, de 3 a 4 in para una capa superior de grava.

  4. 4

    Lee las yardas cúbicas. El número grande es exacto; la línea Pedir de debajo es ese número con el margen que elegiste, redondeado hacia arriba al siguiente cuarto de yarda: lo que un proveedor subirá de verdad al camión.

  5. 5

    Pon Pedir extra en 5% o 10% si quieres un colchón para derrames, compactación o un terreno irregular. Copia cualquiera de las cifras con el botón de al lado.

Preguntas frecuentes

Ratings & Reviews

Rate this tool

Sign in to leave a written review.
Loading reviews…

What is a cubic yard?

A cubic yard is a cube three feet on every side — 3 ft × 3 ft × 3 ft, which comes to 27 cubic feet. It is the unit bulk materials are sold and delivered in across the United States: ready-mix concrete, topsoil, mulch, gravel, sand, compost, fill dirt. A truck arrives with yards on the ticket, not feet.

That creates a small daily annoyance. You measure a driveway with a tape in feet. You specify the depth in inches, because nobody pours a slab "0.4167 feet" thick. Then the supplier asks for a number in yards. Three units, one phone call, and the conversion sits in the middle of it. A 24 ft × 20 ft driveway poured 5 inches deep is 480 square feet, 200 cubic feet, and 7.4074 cubic yards — and only that last figure is useful to the person taking your order.

The Cubic Yards Calculator handles that translation. Length and width in feet, depth in inches, cubic yards out. It also shows the figure you will actually say on the phone, because suppliers do not sell 7.4074 of anything.

How to use the Cubic Yards Calculator

  1. Pick the shape of the area. Rectangle covers anything with square corners — a driveway, a path, a raised bed, a slab form. Circle covers a fire pit, a round planter, or a tank pad.
  2. Type the length and width in feet. For a circle, type the diameter — the distance straight across the middle, not the radius.
  3. Type the depth. This box starts in inches, because that is how depth is specified: 3 in of mulch, 4 in of walkway slab, 5 to 6 in of driveway concrete.
  4. Change a unit if you measured differently. Every box has its own unit next to it — inches, feet, yards, centimetres, or metres — so a bed measured in metres still comes out in yards.
  5. Set Order extra to 5% or 10% if you want a cushion for spillage and compaction. It defaults to None.
  6. Read the two numbers. The large one is the exact volume. The Order line below it is that volume plus your overage, rounded up to the next quarter yard.

The answer updates as you type. There is no Calculate button to hunt for and no result that appears somewhere below the fold.

Most pages that answer "how many cubic yards do I need" want something first. A ZIP code. A phone number. A delivery date. An account, or a two-week trial of a contractor estimating suite billed per seat per month. This is four multiplications and a division — it should not be bait in a lead-capture form. Type three numbers, read the answer, close the tab. The math runs in your browser; nothing is sent anywhere and nothing is stored.

The formula behind cubic yards

cubic yards = (length × width × depth) ÷ 27 — with length, width, and depth all measured in feet.

That is how to calculate cubic yards by hand: three variables and one constant. Length × width is the surface area in square feet. Depth is how thick the material lies on that area. 27 is the number of cubic feet in a cubic yard, and it is the single most useful figure on this page.

The step people get wrong by hand is the depth. Four inches is not 4 — it is 4 ÷ 12, or 0.3333 feet. Leave it as 4 and your answer is twelve times too big, which is how someone ends up with a driveway's worth of mulch on their lawn. There is a shortcut that skips the conversion: multiply the square footage by the depth in inches, then divide by 324 instead of 27.

A worked example: a concrete driveway

Cubic yards for a driveway are the most common version of this question. Say the driveway is 24 ft long, 20 ft wide, and the pour is 5 inches deep.

  1. Area: 24 × 20 = 480 square feet.
  2. Depth in feet: 5 ÷ 12 = 0.4167 ft.
  3. Volume: 480 × 0.4167 = 200 cubic feet.
  4. Cubic yards: 200 ÷ 27 = 7.4074 yd³.
  5. Order figure at 10% extra: 7.4074 × 1.1 = 8.148, rounded up to the next quarter = 8.25 yd³.

Circles use the same idea with a different area. The formula is π × (diameter ÷ 2)² × depth ÷ 27. A 10 ft round pad for a fire pit is 78.5398 square feet; at 4 inches deep that is 26.1799 cubic feet, or 0.9696 cubic yards — which orders as a flat 1.

Common depths and what one yard covers

Coverage is the question behind most cubic yardage math: one yard of material, spread how thin, covers how much ground? Divide 324 by the depth in inches.

DepthArea one cubic yard coversTypical use
1 in324 sq ftTopdressing a lawn with compost
2 in162 sq ftLight mulch refresh
3 in108 sq ftFull mulch layer, gravel path top
4 in81 sq ftPatio slab, walkway, new-lawn topsoil
6 in54 sq ftDriveway concrete, deep gravel base
12 in27 sq ftRaised bed fill, deep planter

Doubling the depth halves the coverage. That makes the table a fast sanity check on any quote: if a supplier says one yard will finish a 400 sq ft patio at 4 inches, the arithmetic says you need five.

Here is what the Cubic Yards Calculator returns for six ordinary jobs, with no overage applied.

JobAreaDepthExact yd³Order
Mulch bed, 12 × 10 ft120 sq ft3 in1.11111.25
Gravel path, 50 × 3 ft150 sq ft3 in1.38891.5
Round fire-pit pad, 10 ft across78.54 sq ft4 in0.96961
Concrete patio, 20 × 10 ft200 sq ft4 in2.46912.5
Concrete driveway, 24 × 20 ft480 sq ft5 in7.40747.5
Topsoil for a new lawn, 40 × 30 ft1,200 sq ft4 in14.814815

Notice how rarely the exact number is orderable. Ready-mix concrete is batched in quarter-yard increments, and bulk soil, mulch, and gravel are scooped by the quarter or half yard, so the order column rounds up to the next quarter. A figure already sitting on a quarter stays there — exactly 1 yard orders as 1 yard, not 1.25.

Edge cases and limitations

This is a volume calculation, not a weight one. A cubic yard of dry topsoil runs around 2,000 lb, damp soil closer to 2,700, gravel about 2,800, and concrete roughly 4,000. If the load is going in a pickup rather than on a truck, weight is the binding constraint — a half-ton truck is past its rating with one yard of wet soil, whatever the geometry says.

Compaction is the other thing the formula cannot see. Gravel and soil settle once they are raked, rolled, and walked on, and an uneven subgrade is deeper in places than your tape suggested. That is what the overage setting is for. It is worth knowing that on small jobs the overage often changes nothing: a 12 × 10 ft mulch bed at 3 inches is 1.1111 yd³, and adding 5% gives 1.1667 — still 1.25 after the round-up. The quarter-yard step had already absorbed it.

For concrete, the risk is lopsided. A short load means a cold joint and a second delivery fee; a little extra goes into a step form or gets wheeled off. Round generously. For mulch, order tight — you can always top it up next season.

Irregular areas need splitting, because the Cubic Yards Calculator does one rectangle or one circle at a time. An L-shaped driveway is two rectangles; a patio with a rounded end is a rectangle plus half a circle. Run each piece and add the yards, since they are all the same unit. Just do not add areas that sit at different depths without calculating each separately. Zero is handled honestly — a zero dimension gives 0 yd³ and an order of 0, never a phantom quarter yard — and a negative dimension is refused outright with "Sizes can't be negative. Drop the minus sign."

Related calculations

If you already know your volume in cubic feet and only need the division by 27, the cubic feet calculator works the geometry side and reports yards, gallons, and cubic metres alongside. For a shape that is not a flat area with a depth — a cylinder, a cone, a sphere — the volume calculator covers six solids.

Material-specific math lives in its own tools. The concrete calculator handles slabs, footings, columns, and stairs and converts yards into bag counts. The gravel calculator adds tonnage, which is what a gravel supplier usually quotes. The mulch calculator converts a bed into bags. And if measuring the area is the part you are stuck on, the square footage calculator adds up rooms and sections in feet, inches, metres, or centimetres and hands back a single total.

Frequently asked questions

How many cubic yards of concrete do I need for a driveway?

Measure the length and width in feet, multiply for square footage, then apply your pour depth. A standard residential driveway is 5 to 6 inches of concrete. For a 24 ft × 20 ft driveway at 5 inches, that is 480 sq ft × 0.4167 ft = 200 cubic feet, or 7.4074 cubic yards. Add 10% for an uneven subgrade and the Cubic Yards Calculator puts the order at 8.25 yd³. A short pour is expensive to fix, so round up.

How do I convert square feet to cubic yards?

Square feet is an area and cubic yards is a volume, so you cannot convert directly — you need a depth. Once you have one, multiply the square footage by the depth in inches and divide by 324. A 200 sq ft patio at 4 inches is (200 × 4) ÷ 324 = 2.4691 cubic yards. Dividing by 324 instead of 27 is just the ÷ 12 inch-to-foot step folded into the constant.

Why is the order figure higher than the exact answer?

Because the exact answer is usually unorderable. Suppliers batch and scoop in quarter-yard increments, so a correct figure like 1.2346 has to become 1.25 before anyone can put it on a truck. The page rounds up to the next quarter rather than to the nearest one, since rounding down leaves you short. If your number already lands on a quarter, it is left alone.

Can I enter metres and centimetres?

Yes. Every box carries its own unit — inches, feet, yards, centimetres, or metres — and they can be mixed freely in one calculation. A bed measured as 3 m × 2 m at 10 cm deep comes out as 0.7848 cubic yards, which orders as 1. The cubic metres figure is shown too, so you do not have to pick a side.

How many bags make a cubic yard?

Depends on the bag. Mulch and soil usually come in 2 cubic foot bags, so a cubic yard is 13 or 14 of them; 3 cubic foot bags take 9. An 80 lb bag of ready-mix concrete yields about 0.6 cubic feet, which puts a cubic yard at roughly 45 bags — a good sign it is time to call for a truck. The concrete calculator does the bag count for you.

What does the Cubic Yards Calculator cost?

Nothing, and there is no account, no trial, and no upgrade tier holding the circle mode or the order figure hostage. This is the whole tool. Microapp is funded by membership and ads, and 10% of every dollar it earns goes to charity off the top, audited quarterly.